各向异性本构关系在板料成形数值模拟中的应用

对几种能表达面内各向异性的屈服准则Hill、Barlat-Lian、Barlat进行了比较。以弹性变形服从各向同性广义虎克定律的情况下，给出了基于张量算法推导的弹塑性本构关系的一般表达式，并由此导出了相应屈服准则的弹塑性本构关系的显式表达。借助ABAQUS软件本构模块用户子程序接口，分别实现了这些屈服准则在ABAQUS的嵌入。以模拟方形盒的拉延过程为例，分析了不同的屈服准则在板料成形过程数值模拟中的应用。模拟结果表明，基于弹塑性本构关系一般表达所列出的相应屈服准则的显式表达式是正确的；在采用壳元来模拟板料成形时，采用Barlat准则的模拟结果和采用Barlat-Lian准则的结果差别不大。     

功能纳米材料研究进展——唐智勇研究员及其团队专访

正功能纳米材料是化学、物理、生物和材料科学多学科交叉的前沿,是纳米科技发展的基础。功能纳米材料集中体现了小尺寸、精准控制、高集成度和强相互作用等现代科学技术发展的特点,是将量子力学效应工程化或技术化的最好载体之一,呈现独特的光、电、磁、机械和催化等性质,在物理、生物、化学和材料学领域中都有广泛的研究和应用前景。     

Study of diode-pumped Yb:YAG disk lasers at low temperature

A Yb:YAG disk laser with V-shaped stable resonator and active-mirror configuration,end-pumped by a 940-nm InGaAs laser diode array,is demonstrated.Performances and optimization of the disk laser at low temperature over a range of 130-200 K are investigated theoretically and experimentally.Laser output energy of 1.46 J/pulse operating at 10-Hz repetition rate is obtained with the optimum output coupler transmission of 30%,and the corresponding optical-to-optical efficiency is 48.7%.     

Scintillation reduction using multi-beam propagating technique in atmospheric WOCDMA system

We propose employing multi-beam propagating technology to mitigate the influence of atmospheric scintillation to the wireless optical code division multiple access (WOCDMA) system and then deduce the bit error rate (BER) formulas of systems in weak and strong scintillations,respectively.According to simulation experiment results,multi-beam propagation can improve the system performance very well compared with single-beam propagating technique.Moreover,the more beams we use,the better the performance we get.When the received optical power is-30 dBm,the BER of the system employing four beams is 5 and 1 dB lower than that of using single-beam propagating technique in weak and strong scintillations,respectively.     

Investigation of morphology selection for CBr_4-C_2Cl_6 alloy in three dimensions with multi-phase field method

With the multi-phase field model, the unidirectional solidification with constant velocity growth and variable velocity growth of the CBr4-C2Cl6 eutectic alloy is simulated in three dimensions. The simulated results with constant velocity growth show that with the increase of pulling velocity, the morphology of the CBr4-C2Cl6 alloy evolves in the sequence of lamellar merging →lamellar-rod transition→stable lamellar growth→oscillating growth→lamellar branching. A morphology selection map is established with ...     

Electromechanical cracking in ferroelectrics driven by large scale domain switching

Experimental results indicate three regimes for cracking in a ferroelectric double cantilever beam (DCB) under combined electromechanical loading. In the loading, the maximum amplitude of the applied electric field reaches almost twice the coercive field of ferroelectrics. Thus, the model of small scale domain switching is not applicable any more, which is dictated only by the singular term of the crack tip field. In the DCB test, a large or global scale domain switching takes place instead, which is driven...     

A study on volunteer augmentation navigation technology

Navigation augmentation technology is one of the most common methods to increase the continuity,reliability and integrity of the global satellite navigation system.The concept of volunteer augmentation navigation (VNA) is proposed and the elements and topological structure of VNA are also analyzed in this paper.The study focuses on the neural network model that volunteers and ordinary users use modern communication information network to exchange self-organizing information.The neural cell model of Voluntee...     

Modelling of multi-bodies in close proximity under water waves——Fluid resonance in narrow gaps

Viscous fluid model and potential flow model with and without artificial damping force(f=-μV,μ the damping coefficient and V the local averaging flow velocity) are employed in this work to investigate the phenomenon of fluid resonance in narrow gaps between multi-bodies in close proximity under water waves.The numerical results are compared with experimental data available in the literature.The comparison demonstrates that both the viscous fluid model and the potential flow model are able to predict the res...     

Efficient preparation of a four-photon cluster state with homodyne measurement via cross-Kerr nonlinearity

A scheme is proposed for generating a multiphoton entangled cluster state among four modes. The scheme only uses Kerr medium, beam splitter and homodyne measurements on coherent light fields, which can be efficiently made in quantum optical laboratories. The photon in the signal mode is prepared in a superposition state of the vacuum state and one-photon state while the probe beam is initially set in a coherent state superposition. The strong probe mode interacts successively with multiple signal-mode photo...     

Multiparty-controlled teleportation of an arbitrary GHZ-class state by using a d-dimensional (N+2)-particle nonmaximally entangled state as the quantum channel

We present a scheme for multiparty-controlled teleportation of an arbitrary high-dimensional GHZ-class state with a d-dimensional (N+2)-particle GHZ state following some ideas from the teleportation (Chinese Physics B, 2007, 16: 2867). This scheme has the advantage of transmitting much fewer particles for controlled teleportation of an arbitrary multiparticle GHZ-class state. Moreover,we discuss the application of this scheme by using a nonmaximally entangled state as its quantum channel.